The assembly of gypsum partition

  For this time I will discuss the installation of Gypsum Partition.
  Partition is the division of a room into sections, for example, we want to divide a large room into 2 living      rooms and space for our work

.There are several kinds of partitions;
A. Gypsum partition
2. Wood partition
3. stone wall
4. sketsel
5. Folding Door

Material in use:
A. 4x4 & 4x2 frame Hollow
2. 2cm gypsum couplers & 5 cm
3. gypsum 9 mm or 12 mm
4. fabric tip
5. Coumpond
6. Concrete nails 5 cm
7. reducer


Equipment is needed:
A. Drill & driver / Phillips head screwdriver (+) (in order to quickly use a drill driver who ends +)
2. Hacksaw / zinc scissors (for cutting hollow steel)
3. Scraf (to apply coumpond)
4. Steger
5. yarn lot
6. sandpaper

How it works

1 Connect the 60cm long hollow frame as you wish not to forget the lot (so as not to skew)
     like the picture below

2 Attach the gypsum with gysum 2mm screw next to it in every frame of hollow
    like the picture below

  3 Attach the silencer Glasswoll / rockwoll
4 Attach gypsum again next
5 Coumpond each connection and used couplers
5 outboard tip at each connection gypsum fabric which has been in coumpond for each gypsum
glue into one
5 coumpond back over the tip of cloth until smooth, if not the fine sandpaper
6. Partition is ready for the finishing