The assembly of gypsum partition

  For this time I will discuss the installation of Gypsum Partition.
  Partition is the division of a room into sections, for example, we want to divide a large room into 2 living      rooms and space for our work

.There are several kinds of partitions;
A. Gypsum partition
2. Wood partition
3. stone wall
4. sketsel
5. Folding Door

Material in use:
A. 4x4 & 4x2 frame Hollow
2. 2cm gypsum couplers & 5 cm
3. gypsum 9 mm or 12 mm
4. fabric tip
5. Coumpond
6. Concrete nails 5 cm
7. reducer


Equipment is needed:
A. Drill & driver / Phillips head screwdriver (+) (in order to quickly use a drill driver who ends +)
2. Hacksaw / zinc scissors (for cutting hollow steel)
3. Scraf (to apply coumpond)
4. Steger
5. yarn lot
6. sandpaper

How it works

1 Connect the 60cm long hollow frame as you wish not to forget the lot (so as not to skew)
     like the picture below

2 Attach the gypsum with gysum 2mm screw next to it in every frame of hollow
    like the picture below

  3 Attach the silencer Glasswoll / rockwoll
4 Attach gypsum again next
5 Coumpond each connection and used couplers
5 outboard tip at each connection gypsum fabric which has been in coumpond for each gypsum
glue into one
5 coumpond back over the tip of cloth until smooth, if not the fine sandpaper
6. Partition is ready for the finishing                                                                                                                                                                                         

Plapon GRC board

 
GRC (Glass Reinforced Sement) or so-called cement board, grcboard and other materials is an alternative solution other ceiling partitions

. GRC Product Excellence;

- Strong and impact resistant
Water resistant and moisture-
- Hold the fire
- Hold the mold and termites
- Soundproofed
- Flat surface, without having to diplamir
- Fast and practical in the works
- No cause excessive dirt in the works
GRC plapon thickness; 6mm, 8mm and 10mm
Can be applied in;
- Installation of Ceiling Interior & Overstek (5mm thick)
- Installation of partition (thickness 6mm, 8mm & 10mm)
- Installation of Backing Spandrell (8mm & 10mm thick)
- Installation of roof Alas (8mm & 10mm thick)
- Installation of Interior Column Cover (8mm & 10mm thick)

otherwise it can be combined with aluminum frame, PVC other decorative tau, can also be used for system connection open nat.

Overcoming the rift in the way of connection GRC plapon

GRC is a type of gypsum board that is often used?? View of quality material that is harsh and waterproof, not a few people are more interested in using material from the jayaboard GRC, Knauf or other types of gypsum board? I myself was agreed that if the GRC quality is better than other types of gypsum board? but unfortunately not good GRC lis gypsum and glue between the boards, but it always cracks on each connection after installation. To the solution is to use coumpound A + B:
coumpound A + B is:
Flour mixed with gypsum in rakol (wood glue).

GRC compound A + B as a base layer made ​​to connect the GRC board. made of strong materials and compounds with the GRC board so as to avoid the possibility of cracks in the joint.

 

How to use:

     GRC compound A and B mixed with 1:1 ratio and stirred evenly. uneven mixing will inhibit the drying process and does not produce an optimal adhesion.
     The resulting mixture should be used within 30 minutes. Avoid the use of the mixture after the mixture begins to harden, approximately 50 minutes
     GRC layer of compound A and B should be allowed to dry for minimum 24 hours before coating with the next layer.

  Installation order plaponya should also consider the minimum distance at 480 mm by 600 mm spacing hangers.

plapon differences classical and minimalist plapon

plapon classic
 
Employment ceiling of the classical model which prioritizes the artistic side of high artistic merit that are tailored to the shape of the building, usually a building with a classical facade, the interior also follows the classical model. Ceiling models feature classic flat design (flat) and trap (drop) to highlight the carvings on the list profile by adding ornaments, ornament, not least the use of models in the design dome. For the dome design, adapted to the low height of the room. Dome design is usually applied to the area for the building of two floors voide atai more. For the finishing is usually the ceiling using the classical model of special effect paints to further highlight the classical side. And only certain individual who has taste and artistic ceiling that uses the classical model in place of residence
plapon classic example of an image:

 plapon minimalist
 
To the ceiling ceiling minimalism is a model familiar to many applied to building a modern minimalist style. Usually implemented by the developer (developer) of housing in accordance with architectural standards they use. Hotel building, mall or shop also apply to the ceiling minimalist interior design. Ceiling minimalist design uses only flat (flat) with a slight increase in trap (drop) without using the profile list, but only using shadow line (string water) to sweeten the edge of the ceiling between the walls with paint finishing plain ordinary. There is also a job that combines a semi-classical minimalist ceiling. All depends on the tastes of each individual.
plapon minimalist example image: