how to fix gypsum plapon

plapon often called gypsum ceiling, no escape from the problems of dust, spots due to leaks, or holes. Dust can still be solved by cleaning regularly. But when it berflek let alone a hole, then the ceiling gypsum should be patched or replaced. Call handyman? Not yet! Gypsum ceiling patching is actually a pretty easy job. You only need simple tools and materials. For more details, please follow the steps below.

1. Tools and materials required:
 - Cutter, Compound (fillers) adhesives, compound coatings, saws, masking tape, putty knife, mats, gypsum board, meter

 2. Take the rest of gypsum and gypsum measure so that it can close the holes. Huge chunks of gypsum should be larger than the hole
.
 3. Drawing with pencil on the size of the gypsum ceiling cavities. This is necessary to do so holes can be covered with neatly. Then use the cutter, make a notch on the ceiling.

 4. Make a hole in the ceiling of gypsum plasterboard size would you plug it in, by sawing a hole diagonally toward the boundary of the size of the gypsum earlier.

 5. After you saw the four-way diagonal, break the ceiling around the hole so it forms a rectangular hole. Cut with cutter ceiling remains until it is completely removed. Do not forget to tidy up the sides of the hole so that pieces of gypsum cement shall be installed neatly.

 6. Prepare other gypsum board with the size of all the holes and 1/3 the width of the hole, as many as two. Gypsum is used as an additional order for gypsum cement. Apply adhesive compound on this additional order.

 7. Immediately attach an additional order compound smeared glue on the top of the gypsum ceiling. Attach the second frame on both sides of the barrier before long hole. Wait until the compound is completely dry. It is characterized by the frame buffer can no longer move when pressed.

 8. After an additional frame is attached firmly, take pieces of gypsum cement and paint was also with adhesive compound (compound should be applied not only in the middle of gypsum, but also on the surrounding gypsum that can be attached to the ceiling with strong gypsum).

 9. Dilute compound coatings with water and apply on all four sides of the connection between the ceiling gypsum cement. Apply using a spatula so that the compound can menempelpada gypsum ceiling flat. For this stage of the compound coating layer applied enough alone.

 10. Immediately after completion of compound coatings applied, attach a special masking tape on all four sides of the connection earlier. So that the tape sticks very well, hit with a putty knife. Then apply two coats of compound coatings as much. Allow to dry, then after that you can paint your ceiling gypsum back.